Serving the South Bay, Peninsula, East Bay and Tri-Valley

Heating and furnace repair

Local heating and furnace repair in the Bay Area

Based in Union City and licensed since 2005. We repair furnaces, wall heaters, floor furnaces and heat pumps across the South Bay, Peninsula, East Bay and Tri-Valley, and we repair before we replace.

What we do

Furnace and heating repair from a local, licensed team.

  • Furnace repair
  • Furnace tune-ups and safety inspections
  • Wall heater repair and installation
  • Floor furnace repair, rebuilds and replacement
  • Heat pump repair, installation and replacement
  • Thermostat repair and installation
  • Electric heater services
  • Furnace replacement and new heating systems

We follow a repair before replacement approach. When your furnace, wall heater or floor furnace can be repaired, we say so. When replacement is the better choice, we explain why and price out your options in writing, so you can decide without pressure.

Carrier gas furnace installed in an attic with venting and gas line

Common heating problems

What we fix most often

Most no-heat calls come down to one failed part. Here is what we see every winter, and what usually causes it.

Furnace won't turn on

Check the thermostat batteries and settings first. If that is not it, the cause is often a failed igniter, a dirty flame sensor, a tripped safety switch or a clogged filter. We test each one and replace only the part that failed.

Turns on, then shuts off

Short cycling usually points to a dirty flame sensor, a clogged filter, overheating or a thermostat problem. It wastes energy and leaves rooms half warm, so it is worth fixing early.

Heater won't light

A pilot that keeps going out, or a wall heater or floor furnace that clicks with no flame, usually means a worn thermocouple, a dirty pilot assembly or a gas valve problem. Please don't keep relighting it.

New or loud noises

Squealing, rattling, a bang at start-up or a rumble after shut-off can mean a worn blower motor, a loose panel or delayed ignition. A bang at start-up should be checked soon.

Strange smells

A short burning-dust smell the first time the heat runs each fall is normal. A smell that lingers or a hot electrical odor is not. A rotten-egg smell means gas: see the safety note below.

Cold rooms and uneven heat

One room warm and another cold often comes from a dirty filter, a weak blower or leaky or blocked ductwork. We check the furnace and the airflow, and repair or seal the ducts when that is the cause.

How a heating repair visit works

Honest diagnosis, then the right fix

  1. Call your local lineCall the number for your area. Same-day heating repair is available when our schedule allows.
  2. Find the real problemWe test the system from the thermostat to the igniter, burners, gas valve, blower and venting.
  3. Clear options in writingWe explain what we found in plain language and price the repair before any work starts.
  4. Repair and safety checkWe fix the problem, check the gas connections and venting, test for carbon monoxide and walk you through what we did.

Gas safety

Smell gas? Leave first, then call.

A rotten-egg smell can mean a gas leak. Leave the house right away, don't flip switches or use your phone inside, and call 911 from outside. PG&E's gas line is 1-800-743-5000. Call us once the gas company says it is safe to work on your furnace.

Customer reviews

Heating customers in their own words

Five-star reviews from our Google Business Profile.

“Marko is Awesome! I have an original 1940 floor furnace. He said it would be $7500 to replace but he was able to rebuild it and add a thermostat to it. It originally just had a on/off valve. He did a beautiful job and cleaned up everything…”
Vincent KowskiFloor furnace rebuild
“Marco has maintained our HVAC for years and has now updated us to meet recent CA standards. He is extremely friendly, helpful and dependable. He explained the updates clearly and priced out our different options.”
Heather McDonaldHVAC maintenance and system update
“I have worked with Marko for many years. He had installed a new furnace and Air Conditioning. He knows his profession and is very good at HVAC. Whenever we have needed him to come back to check something he is always very responsive. Easy to work with and fair prices.”
MicheleFurnace and AC installation
Leave us a Google reviewReviews are excerpts from Google reviews.

Heating FAQ

Furnace and heating questions

Should I repair or replace my furnace?
Repair first, when it is safe and makes sense. Most no-heat calls come down to one failed part, such as an igniter, flame sensor, pressure switch or blower motor. If the heat exchanger is cracked, the furnace is unsafe, or repairs would cost a large share of a new system, we explain why and price out replacement options, including heat pumps.
How often should my furnace be serviced?
Once a year, ideally in the fall before the first cold night. A tune-up covers the filter, burners, flame sensor, ignition, blower, thermostat, gas connections and venting, so small problems are fixed before they become no-heat calls.
Why does my furnace turn on and then shut off?
That is called short cycling. Common causes are a dirty flame sensor, a clogged filter, an overheating furnace or a thermostat problem. It wastes energy and wears out parts, so it is worth having checked early.
Can you repair an old floor furnace or wall heater?
Often, yes. We repair, rebuild and replace floor furnaces and wall heaters. In one Redwood City home we rebuilt an original 1940 floor furnace and added a thermostat instead of replacing it.
Do you offer same-day heating repair?
Yes, when our schedule allows. Call the number for your area and we will tell you what we can do today.
Do you install and repair heat pumps?
Yes. We repair, replace and install heat pumps, including variable-speed systems, and we can tell you honestly whether a furnace repair or a heat pump makes more sense for your home.
What should I do if I smell gas?
Leave the house right away. Do not flip switches or use your phone inside. Call 911 from outside, then PG&E at 1-800-743-5000. Call us once the gas company says it is safe to work on your furnace.

Contact

Tell us what is going on with your system.

Send a request and we will get back to you. For no heat or no cooling, call us directly.

Call (408) 992-0305